QP PT 10G A 10Gbps High Speed Light Detection Module

The QP-PT-10G 10Gb / s high-speed light detection module integrates 10Gb / s PIN detectors and low noise amplifiers, single-mode / multimode fiber-coupled inputs, SMA connector outputs with high gain, high sensitivity, AC coupling output, Flat gain, and other characteristics, mainly used in the high-speed optical fiber transmission system, ROF and optical fiber sensing systems and other fields.

Features:

Spectral range ：1100~1650nm
Data rate up to 10.7Gb/s
InGaAs/InP InGaAs/InP planar structure PIN detector
High sensitivity :-19dBm
Saturation optical power 1dBm
Integrate preamplifier
Compact structure SMA output
High-speed optical pulse detection
High-speed optical fiber communication
Microwave link
Brillouin diffraction

QP PT 10G A 10Gbps High Speed Light Detection Module

Performance Parameters

Parameter		Symbol		Unit		Min	Typ	Max	Test condition
Response wavelength				nm		1100		1650
-3dB bandwidth		BW		GHz		10	11		from 130MHz
Cutoff frequency		flow		KHz			24	52
Dark current		Id		nA				10	25ºC
Transimpedance		Zt				-	2000	-	p-p, f=100MHz
Maximum output swing		Voutpp		mVp-p		-	330	-
Output impedance		Ro				-	50	-	Single-ended signal
Optical return loss		ORL		dB		35
Saturation optical power		Ps		dBm		0	1	-		NRZ，ER=10dB 9.95328Gb/s,PRBS 231-1,BER=10-12
Sensitivity		S		dBm			-19	-18	25 ºC
							-18	-17	75 ºC
Responsiveness	R		A/W		0.8		0.9		=1550nm
Operating voltage	Vop		V				15
Dimensions	LxWxH		mm		100 x 100 x 34
Input fiber			Single-mode /multi mode fiber
Optical fiber			FC/PC、FC/APC

limit Parameters

parameter	Symbol	Unit	Min	Typ	Max
Input optical power	Pin	mW			10
Operating voltage	Vop	V	13.5		16.5
Operating temperature	Top	ºC	-10		60
Storage temperature	Tst	ºC	-40		85
Humidity	RH	%	5		90